Investigation on the methylene blue adsorbability of biomass carbon derived from orange peels

Lan Thi Nguyen, Khuu Kim Thi Huynh, Dong Chieu Nguyen Ho, Nu Thanh Thi Nguyen, Na Hoai Ho Nguyen, Ly Hoa Thi Nguyen, Hoa Thu Thi Kim, Vien Vo, Trang Thuy Thi Phan

Abstract


This study exposes the low-cost adsorbent with the preparation of nanoparticle carbon from orange peel. The orange peels were subjected to pyrolyze from 700 oC to 900 oC for 5 hours in argon gas. FTIR, Raman, TEM and BET methods characterized the effects of functional groups and surface area of adsorbents. The carbon was used for methylene blue (MB) adsorption from an aqueous solution. Various parameters affecting the adsorption process were investigated, including pH (2 ÷ 10) and initial MB concentration (100 ÷ 300 mg/L). The optimum pH of 4.0 for MB adsorption was obtained. A period of 4 hours was required to reach the equilibrium adsorption of MB. The adsorption process of MB on the carbon from orange peel is consistent with the Langmuir isotherm model.


Keywords


Adsorbent; carbon nano; adsorption isotherm; organce peels; kinetics

Full Text:

PDF

References


N. Bao, Y. Li, Z. Wei, G. Yin, and J. Niu, The Journal of Physical Chemistry C, 115 (2011) 5708-5719. https://doi.org/10.1021/jp1100939

M. Rafatullah, O. Sulaiman, R. Hashim, and A. Ahmad, Journal of hazardous materials, 177 (2010) 70-80. https://doi.org/10.1016/j.jhazmat.2009.12.047

J. Labanda, J. Sabaté, and J. Llorens, Chemical Engineering Journal, 166 (2011) 536-543. https://doi.org/10.1016/j.cej.2010.11.013

A. Demirbas, Journal of hazardous materials, 167 (2009) 1-9. https://doi.org/10.1016/j.jhazmat.2008.12.114

W.-T. Tsai, K.-J. Hsien, and H.-C. Hsu, Journal of hazardous materials, 166 (2009) 635-641. https://doi.org/10.1016/j.jhazmat.2008.11.071

L. Ai, J. Jiang, and R. Zhang, Synthetic Metals, 160 (2010) 762-767. https://doi.org/10.1016/j.synthmet.2010.01.017

S. S. Banerjee and D.-H. Chen, Journal of hazardous materials, 147 (2007) 792-799. https://doi.org/10.1016/j.jhazmat.2007.01.079

E. Vunain, A. Mishra, and B. Mamba, International journal of biological macromolecules, 86 (2016) 570-586. https://doi.org/10.1016/j.ijbiomac.2016.02.005

M.-H. Baek, C. O. Ijagbemi, O. Se-Jin, and D.-S. Kim, Journal of hazardous materials, 176 (2010) 820-828. https://doi.org/10.1016/j.jhazmat.2009.11.110

B. Amarasinghe and R. A. Williams, Chemical engineering journal, 132 (2007) 299-309. https://doi.org/10.1016/j.cej.2007.01.016

X.-g. Lu and Y.-t. Guo, Environmental Science and Pollution Research, 26 (2019) 12776-12787. https://doi.org/10.1007/s11356-019-04753-7

M. Mafra, L. Igarashi-Mafra, D. Zuim, E. Vasques, and M. Ferreira, Brazilian Journal of Chemical Engineering, 30 (2013) 657-665.

https://10.1590/S0104-66322013000300022

N. Feng, X. Guo, and S. Liang, Journal of Hazardous Materials, 164 (2009) 1286-1292. https://doi.org/10.1016/j.jhazmat.2008.09.096

D. Lu, Q. Cao, X. Li, X. Cao, F. Luo, and W. Shao, Hydrometallurgy, 95 (2009) 145-152. https://doi.org/10.1016/j.hydromet.2008.05.008

A. Gislén, M. Dacke, R. H. Kröger, M. Abrahamsson, D.-E. Nilsson, and E. J. Warrant, Current Biology, 13 (2003) 833-836.

https://doi.org/10.1016/S0960-9822(03)00290-2

A. Khalfaoui, I. Bendjamaa, T. Bensid, A. H. Meniai, and K. Derbal, Chemical Engineering, 38 (2014) 361-366.

https://10.3303/CET1438061

M. Boumediene¹, H. Benaïssa, B. George, S. Molina, and A. Merlin, Maderas. Ciencia y tecnología, 17 (2015) 69-84.

https://10.4067/S0718-221X2015005000008

A. Andreas, J. Reinaldo, and K. Tertira, International Conference of Industrial, Mechanical, Electrical, and Chemical Engineering (ICIMECE), (2016) 59-62. https://10.1109/ICIMECE.2016.7910435

T. A. Salman and M. I. Ali, Iraqi Journal of Science,

(2016) 1-13. https://www.researchgate.net/publication/295546962_Potential_Application_of_Natural_and_Modified_Orange_Peel_as_an_Eco-friendly_Adsorbent_for_Methylene_Blue_Dye

L. V. Cát, Hấp phụ và trao đổi ion trong kĩ thuật xử lí nước và nước thải. NXB thống kê, Hà Nội, 2002.

M. Ulfa and D. Prasetyoko, Conference Series: Materials Science and Engineering, 617 (2019) 012001. doi:10.1088/1757-899X/617/1/012001

S. R. Al-Mhyawi, N. A.-H. Abdel-Tawab, and R. M. El Nashar, Polymers, 15 (2023) 277. DOI:10.3390/polym15020277

M. E. Fernandez, G. V. Nunell, P. R. Bonelli, and A. L. Cukierman, Industrial crops and products, 62 (2014) 437-445. https://doi.org/10.1016/j.indcrop.2014.09.015

L. Huang, Y. Zhou, X. Guo, and Z. Chen, Journal of Industrial and Engineering Chemistry, 22 (2015) 280-287. https://doi.org/10.1016/j.jiec.2014.07.021

M. Dresselhaus, A. Jorio, A. Souza Filho, and R. Saito, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 368 (2010) 5355-5377. https://doi.org/10.1098/rsta.2010.0213

K. Subramani, N. Sudhan, M. Karnan, and M. Sathish, ChemistrySelect, 2 (2017) 11384-11392. https://doi.org/10.1002/slct.201701857

K. S. Sing, Pure and applied chemistry, 57 (1985) 603-619. https://doi.org/10.1351/pac198557040603

L. Yu, D. Tatsumi, and T. Kondo, Journal of Wood Science, 68 (2022) 29. https://doi.org/10.1186/s10086-022-02036-3

L. Ai et al., Journal of hazardous materials, 198 (2011) 282-290. https://doi.org/10.1016/j.jhazmat.2011.10.041

R. Jain and M. Shrivastava, Journal of Hazardous Materials, 158 (2008) 549-556. https://doi.org/10.1016/j.jhazmat.2008.01.101

M. A. Zazouli, A. Azari, S. Dehghan, and R. Salmani Malekkolae, Water science and technology, 74 (2016) 2021-2035. DOI:10.2166/wst.2016.287

J. N. Nsami and J. K. Mbadcam, Journal of chemistry, 2013 (2013) 1-7. https://doi.org/10.1155/2013/469170




DOI: https://doi.org/10.51316/jca.2023.049

Refbacks

  • There are currently no refbacks.




*******

Index: Google Scholar; Crossref

---------

Vietnam Journal of Catalysis and Adsorption

Address: Room 302  |  C4-5  |  Hanoi University of Science and Technology. 1 Dai Co Viet, Hanoi.

Tel.: ‎‎‎+84. 967.117.098 (Dr. Phượng)  |  Email: editor@jca.edu.vn  |  FB: JCA.VNACA